SG 7000 Heavy Duty Flywheel Grinder
(GRINDS BRAKE ROTORS TOO!)
DCM Tech’s SG 7000 Flywheel Grinder is built with rugged quality.
The wide array of standard and optional tooling, heavy duty construction and over 50 years of industrial heritage provides the best value in the industry.
Base machines come with manual feed. Power column head positioning and autofeed are available to reduce operator effort and increase productivity. DCM’s exclusive Intelligent Autofeed not only advances the grinding wheel but senses motor load and backs off incrementally if the wheel loads up.
At the end of the grinding cycle this incremental wheel retraction provides a final spark-out for an ideal finish and surface flatness. The SG 7000 flywheel grinder is equipped with a 10HP spindle motor and direct drive table rotating on a precision roller thrust bearing.
An optional fully enclosed shroud keeps the operation clean and quiet, while a coolant filtration systems delivers clean coolant to the grinding surface. Ask about all of the advanced configurations available on the SG 7000 flywheel grinder.
A comprehensive assortment of grinding wheels and mounting adapters assure the most efficient production available on any work or piece.
Applications
- Automotive flywheels and pressure plates
- Diesel and Industrial Flywheels
- Racing floater plates
- Brake rotors
Abrasive Options
- DCM P/N 18-08161-100-83, 6″ Self-Dressing CBN Wheel (Lasts 10X longer!)
- DCM P/N 18-00495-040-12, 6″ Black Medium Hard Grade
- MANY Other Conventional Flywheel Grinding Stones Available
Specifications
| Electrical Requirements | 230/460v 3ph 60hz (other voltages available) 36/24 FLA 115V, 1ph, 60hz required |
| Wheelhead Motor | 10 HP |
| Table Motor | 36 rpm |
| Floor space | 3′ x 3′ |
| SG7000 weight | 1250 lbs. |
| Vertical Clearance | 10″ |
| Maximum Workpiece | 25″ |
Before you decide, our Engineering Team will validate the performance of any DCM style grinder on your specific material. We invite you to send us a sample of your material or come visit our factory to run the machine and see the results firsthand
After you purchase, a Technical Specialist from DCM will come to your facility to set up the machine and train your technical staff and machine operators.
As a DCM customer, you can count on the full support off our Technical Specialists and Engineering Team when you need it. If you have any questions our reliable team will make sure you get the answers you need, when you need them.
